Concrete Mix

Mortar Mix

Blanchard Group’s mortar mix is a ready-to-use hydraulic mix with a high-quality brick sand and mortar cement base. It is ideal for brickwork and can be used as parget for chimneys, walls, fireplaces, pointing, etc. STORE IN A DRY PLACE.

Mixing

Pour the contents of the bag into a mixer, mortar trough, wheelbarrow or on a clean, smooth surface. Make a hole in the centre and add 3.6 litres (.83 imp. gal.) of water, in small quantities at a time, mix thoroughly using a spade or hoe until uniform. Add a bit of water if the mixture is too thick.

Layer & Finishing

Once the desired consistency has been achieved, apply the mixture to wet surfaces. Spread the mortar in an even layer. The mortar must be used within 2 to 3 hours of mixing, depending on ambient temperature. All mortar joints must be finished with a metal tool for appearance and weather resistance. The mortar mix must not be used in temperatures below 4°C (39.2°F). Allow mortar mix to cure for 72 hours. Keep wet for at least 3 days.

Yield

Once wet, a 25kg bag will lay approximately 40 bricks or 12 concrete blocks.

Warranty

Blanchard Group guarantees that the materials used to make this product are of the highest quality and that the product is suitable for the intended use. Blanchard Group makes no other warranty, express or implied. The responsibility of Blanchard Group with respect to this warranty is limited to the replacement of the product if deemed defective or, at the customer’s discretion, refund of the purchase price of the product.

  • Fast-Setting Concrete Mix
  • Traction Sand
  • Concrete Mix
  • Sand Mix
  • Shotcrete

High-tech system to bag products


  Contact Us
Top